KX-IT16B/KX-IT17C LCR Meter

Specification: Main Technical Parameters

Model Number		KX-IT16B	KX-IT17C
Test Frequency		50Hz-200kHz 37 frequency points	50Hz, 60Hz, 100Hz, 120Hz, 1kHz, 10kHz, 20kHz, 40kHz, 50kHz, 100kHz, total 10 points
Test Parameter		C.L, X, B, R, G, D, Q, ESR, Rp. θ. \|Z\|, \|YI, P	C, L.X, B.R, G, D, Q, ESR, DCR, TURN.Rp, θ, \|ZI, IYI, P
Test Level		10mV-2Vrms
Fundamental Accuracy		0.05% accuracy table prevails
Test Speed		Fast: 50 times/sec, medium 20 times/sec, slow 6 times/sec (frequencies above 1kHz)
Display range	\|ZI, R, X	0.01MΩ～99.9999MΩ
	YI.G, B	0.00001μS~99.9999S
	C	0.00001pF～9.99999F
	D	0.00001～9.99999
	DCR	0.01MΩ～99.9999MΩ
	L	0.00001μH～99999.9H
	Q	0.01～99999.9
	θ(RAD)	3.14159~3.14159
	θ(DEG)	-179.999°~179.999°
	△%	-99.999%～99.999%
	Turns-Ratio	-		1:0.01-100:1
Signal Source Output Impedance		30Ω, 100Ω
Internal DC bias voltage		0V, 2V		0V, 1.5V, 2V
Ranging method		Automatic, Hold
Trigger mode		Internal, Manual, Auto, External, Bus
Calibration Function		Open/Short, Full Frequency Zero, Spot Frequency Zero
Equivalent circuit		Series, Parallel
Comparator		10-position selector, ,BINO～BIN9, NG, AUX
		PASS, HI, LOW(PASS/FAIL LED display)
Interfaces		RS232C, UsbHost, USB Device, Handler, GPIB(Option)
Temperature and Humidity		0℃~40℃, Relative Humidity≤75%.
Power Requirements		Voltage: 100～120 Vac or 198～242 Vac
		Frequency: 46～64 Hz, power greater than 50 VA
Volume(WxHxD)		310mmx115mmx315mm
Weight(Net)		4.5Kg

Features

1. Highly comparable with international brand LCR bridge test data (Keysight, WK).

2. Keyboard lock function, power-down data protection function.

3. List scanning function, open circuit, short circuit, load correction function.

4. Simplified Chinese and English operating languages.

5. Test data, test conditions saving (USB flash disk or internal).

6. Test voltage, current automatic balance adjustment function (ALC).

7. 50 sets of test files inside the instrument and 500 sets of test files on USB flash disk can be recalled at any time.

8. U disk can support the format FAT16, FAT32 file system.

Brief Statement

KX-IT16B/KX-IT17C digital LCR bridge is a new generation of impedance tester with color TFT display screen, its basic accuracy of 0.05%, 50Hz~200kHz frequency range can be used to meet the incoming inspection, shipment inspection, to provide product quality assurance.