-
Surge Tester For WindingsEquipment model:KX-IT15KX-IT15 series pulse coil tester is specially designed for the testing needs of wire-wound components, the use of a high-voltage charging of a small capacitor (low test energy)
-
Turns Tester● MODEL:KX-901RH● The microprocessor controls all functions mathematically. ● Simple operation, no range conversion automatic display of the number of turns or resistance measured. ● With an accuracy
-
Finished Core Testing MachineName:KXR-C03 Finished core testing machineWinding specification: Outer diameter Φ15mm - 35mm. Strip width: ≤ 15mm. Sorting grades: From low to high. System test error: <= 0.05% (depending on product
-
Bobbin Copper Wire Transformer Coil Measuring MachineModel:KX-901 EI This instrument is used for measuring the turns of various types of coils, such as motor windings, generator windings, transformers and transformer coils, relay coils, TV HV/LV
-
Transformer Coil Measuring InstrumentKX-901A Transformer Coil Measuring Instrument is mainly designed for coils with high number of coils and high precision,such as transformer coil.
-
Core Sorting Comprehensive Test MachineEquipment model:KXZ-60Machine Size: 1530*1500*1250mm. Operating voltage: 220v. Rated Power: 400w. Frequency: 50HZ. Machine weight: 150KG
-
Impulse Winding TesterEquipment model:KX-IT15KX-IT15 series pulse coil tester is specially designed for the testing needs of wire-wound components, the use of a high-voltage charging of a small capacitor (low test energy)
a routine series of diagnostics and testing for your current transformer should include ct saturation testing to identify the knee point against ieee or iec...
The CT-T1 is a microprocessor-based Current Transformer Tester that measures CT excitation current, turns ratio, and winding polarity tests, all without having to switch the leads during testing. The...
Current transformers can be tested when installed in power transformers and other apparatus. In addition to very precise and automated ratio, polarity and saturation testing the CTMP 2020...
A current transformer tester identifies potentially disastrous current transformer faults, preventing the primary current from overwhelming insulation and in effect causing windings to...
The Knopp Current Transformer Testing System (Type KCTS-8000) is designed to measure the accuracy of instrument transformers having 1 or 5 ampere...
The EZCT-2KA can perform the current transformer (CT) excitation test, measure the CT winding resistance and CT current-ratio automatically. All of the EZCT-2KA’s test leads can be...


















