Key Points for Daily Maintenance of Stranding Winding Machines

Aug 24, 2025

Leave a message

As core equipment for processing wire and cable, magnet wire, and various other types of wire, the operational stability of a stranding winding machine directly impacts production efficiency and product quality. However, many companies neglect daily maintenance, leading to frequent equipment failures, shortened lifespans, and even safety incidents. Scientific daily maintenance not only maintains accuracy but also reduces repair costs and ensures continuous production. The following systematically explains key maintenance points from five aspects.

 

Cleaning and maintenance are fundamental. Regularly remove metal dust and oil from the machine body and winding reel to prevent accumulation that could affect heat dissipation or enter transmission components. Wipe the electrical cabinet surface with a soft cloth to prevent dust accumulation and short circuits.

 

Mechanical component inspections focus on the transmission system and tensioning device. Check belt tension, gear meshing, and bearing wear daily, adjusting any abnormal noise or looseness promptly. Calibrate the parallelism of the cable guide pulleys monthly to ensure evenly aligned wires.

 

Electrical system maintenance requires ensuring control stability. Regularly check the motor's insulation resistance and the tightness of the wiring terminals to avoid overheating caused by loose connections. Clean the PLC controller's heat dissipation holes to prevent overheating and shutdowns. Back up parameter settings to prevent accidental loss.

 

Lubrication management directly impacts the life of the machine. Fill the bearings and guide rails with the specified lubricant according to the manufacturer's instructions. Mixing greases is strictly prohibited. Reduce the oil change interval in high-temperature environments to prevent lubrication failure and increased wear.

 

Standardized operating procedures are key to preventing human error. Operators must confirm that there are no foreign objects blocking the machine before starting. During operation, monitor current and temperature abnormalities in real time. New employees must undergo training and assessment before taking up their positions to prevent overloading or operating in violation of regulations.

Through this systematic maintenance, the reliability of the stranded wire winding machine can be significantly improved, providing a solid foundation for cost reduction and efficiency improvement for the enterprise.

 

Send Inquiry