Rectangle Coil Winding Machine：
A typical KXLJ-0519 winding machine usually comprises the following core components:
1. Frame and base: Provides stable support.
2. Wire feeding system: Includes a spool holder and tension controller for smooth release and control of wire tension.
3. Straightening system: Straightens the round wire from the spool, preparing for winding rectangular corners.
4. Winding head: The core component, containing precision clamps for holding the die and performing the rotational winding action.
5. Wire arrangement system: Guides the wire for precise axial arrangement on the die, achieving layered winding.
6. Control system: Control cabinet and touchscreen human-machine interface.
7. Pneumatic system: Used to perform auxiliary actions such as clamping and wire cutting.
Workflow Overview
1. Preparation: Load the wire onto the wire feeding stand and set the tension. Install the appropriate winding die onto the main spindle. 2. Settings: Input or recall preset winding programs (such as coil size, number of turns, number of layers, speed, etc.) on the touchscreen.
3. Start: Press the start button, and the equipment will start automatically.
4. Winding: The spindle rotates, and the straightened wire is guided by the wire laying system to be precisely wound on the rectangular mold, and shaped at the corners by a specific mechanism.
5. Completion: After reaching the preset number of turns, the equipment automatically cuts the wire and demolds (or waits for the operator to remove the finished product).
